hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Residential
Security & Safety
Signal Management
Search by Manufacturer
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
#
Search by Category
Search by Manufacturer
Eighteen Sound - A Division of AEB SRL - 10CX650
Request
More Information
All Products
from this brand

1-inch Ferrite Coaxial Transducer

Model: 10CX650
  • 92.5 dB LF/106 dB HF SPL 1W/1m average sensitivity
  • Single magnet motor 400W LF - 140W HF maximum program power handling
  • 65 mm (2.5”) Interleaved Sandwich LF Voice coil (ISV) 44 mm (1.75”)
  • HF PEN diaphragm Proprietary Phase Plug design HF copper sleeve for
  • Reduced distortion and higher output
Project List
Product Info
Tech Specs
The 10CX650 is a 10" - 1" coaxial transducer designed for use in compact reflex enclosures and stage monitors as small as 30 lt, with a nominal dispersion of 90 degrees.

The 65 mm (2.5 in) LF edgewound CCAW voice coil employs our Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglass former carries windings on both the outer and inner surfaces to achieve a balanced coil with a uniform distribution of mass and motion energy. This results in an extremely linear motor assembly.

The low profile curvilinear LF cone provides a smooth response within its intended frequency range and maximum reliability under high mechanical stress.

Equipped with a proprietary hybrid radial tangerine phase plug, the integrated HF compression driver has been designed to give smooth coherent wavefront at the horn entrance in all working frequency ranges with a high level of manufacturing consistency. The phase plug, with its short openings and high flare rate value, assures low distortion and remarkable improvements in mid-high frequency reproduction. A copper sleeve reduces inductance values above 10kHz, improving phase and impedance linearization. The HF diaphragm assembly is made with a proprietary treated Polyethylene material. Thanks to its superior diaphragm dimensional stability, the polyethylene shows consistent behavior throughout its whole working life. Moreover, this particular material with its very high value of elasticity modulus is capable of superior transient and intermodulation distortion response. The flat suspension shape is designed to maintain low stiffness and low mid band distortion and response.

An edge-wound aluminum voice coil wound on proprietary treated Nomex completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows a 30% higher value of tensile elongation at a working operative temperature, when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this former material is suitable for use in damp and wet environments.

  • 92.5 dB LF/106 dB HF SPL 1W/1m average sensitivity
  • Single magnet motor 400W LF - 140W HF maximum program power handling
  • 65 mm (2.5”) Interleaved Sandwich LF Voice coil (ISV) 44 mm (1.75”)
  • HF PEN diaphragm Proprietary Phase Plug design HF copper sleeve for
  • Reduced distortion and higher output
  • 90 degrees nominal conical dispersion
  • Atmos ready
  • Extended LF design Suitable for very compact enclosures and stage monitors
 
Request Information
 

Suggested Products

by Meyer Sound Laboratories, Inc.